CradlePoints Wide Band Directional Antenna (Log-Periodic) will collect the cell tower signal and send it through the cable to theintegrated or embedded CradlePoint modem and router. When the modem transmits, the signal is transferred directly to theantenna and broadcasted back to the cell tower.
The main benefit of the this unique multi-band Yagi antenna is its ability to focus its signal in one direction leading to the greater gain figures. This antenna is designed for use on stationary objects such as buildings. If this antenna is not correctly aimed, it will lose its effectiveness. This unique multi-band directional antenna covers the entire spectrum from 700 MHz to 2.5 GHz and can be used for all cellular frequencies including 700 MHz LTE, 1700/2100 MHz AWS, 850 MHz Cellular and 1900 MHz PCS bands, Euro/Asian standard 900 and 1800 MHz bands, WCDMA 2.1 GHz, Nextel 800 MHz, and the 2.5 GHz WiFi band.
This directional ultra wideband log periodic antenna covers a very wide frequency range with high gain. Because it covers both cellular, PCS and WiFi worldwide frequencies, it is very useful for CPE equipment and base station equipment needed for these frequency bands minimizing the amount of equipment needed for each service location. This antenna can be used indoors or outdoors and comes complete with all components needed for pole mounting or wall mounting (does not include the pole – see FMW4/YMST4.) The sealed housing is UV stabilized ABS plastic. The backplate is stainless steel with stainless steel fasteners. All bracket components are stainless steel as well for corrosion protection. The pigtail is 18″ outdoor rated cable terminated with an N/Female connector.
For Products: For Products:COR IBR600E, COR IBR650E, COR IBR600LE, COR IBR650W, COR IBR600P,COR IBR650P, COR IBR600LP, ARC MBR1400E, ARC MBR1400LE, ARCMBR1400W, ARC CBA750E, ARC CBA750LE, ARC CBA750W
Main and Auxiliary Antenna Ports:
In most cases a single antenna connected to the main antenna port will provide sufficient gain. To see “full” 4G speeds on LTE or for enhanced performance on any modem, 2 external antennas may be used.
Features:
- High-gain
- Directional
- Pipe mounting hardware included
- Easy to install
- Weather resistant
- Wide bandwidth
Applications:
- Cellular, PCS or WiFi repeaters
- Indoor Cellular, PCS or WiFi extenders
- WISP equipment
- Non-line of sight
Requires:
- Cable: This antenna includes no cable
|
Specifications |
|
| Part Number | 170588-000 |
| Frequency Range | 700MHz-2500MHz |
| Antenna Gain |
7.3 dBi (700-800MHz)
8.1 dBi (824-894MHz)
7.4 dBi (880-960MHz)
9.2 dBi (1710-1880MHz)
10.6 dBi (1850-1990MHz)
10.4 dBi (2110-2170MHz)
|
| Horizontal Beamwidth | 70 to 90 Degrees |
| Vertical Beamwidth | 85 to 110 Degrees |
| F/B ratio | >20 dB |
| Nominal Impedance | 50 Ohms |
| Polarization | Vertical |
| Maximum Power | 100 Watts |
| Connector | N Female |
| Dimensions | 11.42″ x 8.27″ x 2.56″ Inches |
| Weight | 3.31 lbs |
| Temperature Range | -40 to 158 degrees F |
| Rated Wind Velocity | 134 MPH |
| Lightning Protection | DC Grounded |
| Mount | Pole (2″ Max) with included pole mount hardware |
