Andrew Cinta CNT-600 cable is an excellent choice for longer cable runs especially in building repeater systems due to its low loss characteristics.
These custom made cables will arrive with N/Male crimps on both cable ends.
Other cable lengths are available. If you would like a particular length cable made or need to have the cables expedited, please contact us at (877) 594-5766.
Because these cables are custom made to order, they are not returnable. Please double check your order for accuracy!
| Specifications | |
|---|---|
| Cable Type | WPS-600 |
| Impedance (Ohms) | 50 |
| Maximum Frequency | 9.3 GHz |
| VOP. | 87% |
| Peak Power (W) | 40kW |
| DC Breakdown Voltage | NA |
| DC Resistance (ctr/shld) Ohms | 0.53/1.20 |
| Capacitance | 23.4 pF/ft |
| Inductance | 0.058 uH/ft |
| Outer Conductor | Tape & TC Braid |
| Inner Conductor | Copper Clad Aluminum (Solid) |
| Diameter Over Jacket | 0.590 in. |
| Min. Bending Radius | 1.50 in. |
| Bending Moment (ft lbs) | 2.75 |
| Weight Per Foot | 0.13 lb/ft |
| Tensile Strength | 350 Lbs. |
| Flat Plate Crush Strength | 60 lb/in |
| Attenuation/100 @ 30 MHz | 0.422 dB |
| Attenuation/100 @ 50 MHz | 0.547 dB |
| Attenuation/100 @ 150 MHz | 0.964 dB |
| Attenuation/100 @ 450 MHz | 1.72 dB |
| Attenuation/100 @ 824 MHz | 2.38 dB |
| Attenuation/100 @ 894 MHz | 2.49 dB |
| Attenuation/100 @ 960 MHz | 2.59 dB |
| Attenuation/100 @ 1700 MHz | 3.57 dB |
| Attenuation/100 @ 1920 MHz | 3.82 dB |
| Attenuation @ 2000 MHz | 3.90 dB |
LMR® is a Registered Trademark of Times Microwave Systems.
